PIONEER DEH-P4950MP/XS/ES
Instrukcja Obsługi

Section

Audio Adjustments

08

! CUSTOM is an adjusted equalizer curve that you create. If you make adjustments to an equalizer curve, the equalizer curve setting will be memorized in CUSTOM. ! When EQ FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between EQ FLAT and a set equalizer curve. % Press EQ to select the equalizer. Press EQ repeatedly to switch between the following equalizers: POWERFUL�NATURAL�VOCAL�CUSTOM �EQ FLAT�SPR-BASS

Fine-adjusting equalizer curve
You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ-L/EQ-M/EQ-H).

Level (dB) Q=2N Q=2W Center frequency Frequency (Hz)

1 Press AUDIO and hold until frequency and the Q factor (e.g., F- 80:Q1W) appears in the display. 2 Press AUDIO to select the band for adjustment from among low, mid and high. Press AUDIO repeatedly to switch between the following functions: Low�Mid�High 3 Press c or d to select the desired frequency. Low: 40�80�100�160 (Hz) Mid: 200�500�1k�2k (Hz) High: 3k�8k�10k�12k (Hz) 4 Press a or b to select the desired Q factor. 2N�1N�1W�2W
Note If you make adjustments, CUSTOM curve is updated.

Adjusting equalizer curves
You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM. 1 2 Press AUDIO to select EQ. Press c or d to select the equalizer

band to adjust. EQ-L (low)�EQ-M (mid)�EQ-H (high) 3 Press a or b to adjust the level of the equalizer band. +6 to �6 is displayed as the level is increased or decreased.
# You can then select another band and adjust the level. Note If you make adjustments, CUSTOM curve is updated.

English

Adjusting loudness
Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Press AUDIO to select LOUD.
En

29