Before You Start
Attaching the front panel
% Reattach the front panel by holding it upright to the unit and clipping it securely into the mounting hooks. ! When using for the first time, pull out the film protruding from the tray.
01
WARNING
Keep the battery out of the reach of children. Should the battery be swallowed, consult a doctor immediately.
CAUTION
Resetting the microprocessor
The microprocessor must be reset under the following conditions: ! Prior to using this unit for the first time after installation ! If the unit fails to operate properly ! When strange or incorrect messages appear on the display % Press RESET with a pen tip or other pointed instrument.
! Use one CR2025 (3 V) lithium battery. ! Remove the battery if the remote control is not used for a month or longer. ! There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. ! Do not handle the battery with metallic tools. ! Do not store the battery with metallic objects. ! If the battery leaks, wipe the remote control completely clean and install a new battery. ! When disposing of used batteries, comply with governmental regulations or environmental public institutions� rules that apply in your country/area.
Using the remote control
Point the remote control in the direction of the front panel to operate. ! The remote control may not function properly in direct sunlight.
RESET button
Before You Start
Important
Use and care of the remote control
Installing the battery
Slide the tray on the back of the remote control out and insert the battery with the plus (+) and minus (�) poles aligned properly.
! Do not store the remote control in high temperatures or direct sunlight. ! Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal.
