Installing the fume extractor hood in the wall unit - extractor version (Filter version with charcoal filter) � Apply the drilling template to the inside wall of the wall unit on the right and left sides, and mark out and predrill � 2 mm mounting holes as well as 2 x � 6 mm - 5 mm depth holes for the mounting claws (installation aids). � Fix the flange on the hood outlet hole, using 2 screws. Fig. 6a. � Fully withdraw the vapour catcher of the hood. � Important: Detach and insert the grease filters only when the vapour catcher is fully withdrawn. Remove the grease filters. First remove the rear and then the front grease filter. � For 19 mm side walls, the spacer discs clipped in on the appliance body must be taken out. Mount the hood with 4 x � 4 mm screws. Fig. 7.
Fig. 7 � Insert the hood in the furniture housing and engage both mounting claws (installation aids) on the right and left sides in the side wall of the wall unit and firmly hold the hood for further mounting. Then fix the hood with the 4 or 6 x � 4 mm screws supplied. � Refit the grease filters. Push-in the vapour catcher.
