� Keep the speaker cords away from the antennas to prevent noise. � Do not place the rear speakers on top of a TV. This may cause color distortion in the TV screen. � Be sure to connect both left and right rear speakers. Otherwise, the sound will not be heard.
Inserting three R6 (size AA) batteries into the remote
To prevent the speakers from falling
When you place the speakers on top of the sub woofer and the main unit, do the following.
1 Place the speaker support on the sub woofer
and the main unit. Tighten one of the screws (1) lightly to temporarily fix the speaker support, tighten the other screw to fix (2), then tighten the first screw (1) firmly. Tighten the screws while threading the top boards of the sub woofer and the main unit.
Screw (2) Speaker support
e Ee Ee E
Operating a Sony TV
You can use the following buttons on the remote to operate a Sony TV.
To Press
Turn the TV on or off
Screw (1)
TV ?/1. TV/VIDEO. TV CH +/�. TV VOL +/�.
Switch the TV�s video input Change the TV channels Adjusts the volume of the TV speaker(s)
2 Insert the speaker support in the slot of the front
speakers. Tighten two screws while threading the rear boards of the front speakers.
Tip
When the remote no longer operates the system, replace all the batteries with new ones.
Note Screw Slot Note
If you do not use the remote for a long period of time, remove all the batteries to avoid possible damage from battery leakage.
Getting Started
Notice for carrying this system
Do the following to protect the DVD mechanism.
When carrying the system, do not lift the front speakers only.
1 Turn on the system, then press DVD.
Make sure that all discs are removed from the unit.
2 Hold down DVD, then press ?/1 until
�LOCK� appears.
3 Release ?/1 first, then release DVD. 4 Unplug the AC power cord.
