Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 52 (kliknij aby zobaczyć)
Advanced
� When the flash is activated or [STARRY SKY] in scene mode is selected, you can take only 1 picture. � When the burst mode setting is set to Unlimited: � You can take pictures until the capacity of the built-in memory or the card is full. � The burst speed will become slower halfway. When the built-in memory is used, the burst speed becomes a maximum of 1 picture approximately every 6 seconds. However, the exact timing of this depends on the number of recordable pictures and the card. � The focus is fixed in the first picture. � The ways to control the exposure and the white balance vary depending on the burst mode setting. When the burst mode is set to [D], they are fixed to the values set for the first picture. When the burst speed is set to [E] or [F], they are adjusted each time you take a picture. � When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3. � Burst mode is not canceled when the camera is switched off. � When the burst mode is activated, the audio recording function cannot be used. � When setting auto bracket and the burst mode simultaneously, auto bracket will be performed. � In Burst mode, auto review is activated even the setting is off. (The picture is not enlarged.) You cannot change the auto review setting in the setup menu. � You cannot use burst mode if you have set quality to [RAW].
