|
Kto jest w sklepie?
Sklep przegląda 5799 gości
|
Kategorie
|
Informacje
|
Polecamy
|
|
|
|
|
Dla tego produktu nie napisano jeszcze recenzji!
Frequently Asked Questions
Recording
Can I record from a commercially purchased video cassette or DVD? Can DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL, and +RW recorded on the unit be played on other equipment? � Most commercially sold video cassettes and DVDs are copy protected; therefore, recording is usually not possible. � You can play these discs on compatible equipment such as DVD players after finalizing the disc on this unit. � +RW It is not necessary to finalize +RW. To enable play on other DVD players, please use �Create DVD Top Menu� in the DVD Management menu. � In any case, ability to play a disc depends on the condition of the recording, the quality of the disc, and the capability and format constraints of the DVD player. Can I record digital audio signals using the unit? � You cannot record digital signals. The digital audio terminals on the unit are for output only. (The audio recorded from a digital video camcorder using the DV automatic recording function, however, is recorded digitally.) � You can record if using the PCM signal. When recording DVD, change the �Digital Audio Output� settings to the following via the Setup menu: � PCM Down Conversion: �On� � Dolby Digital: �PCM� � DTS: �PCM� However, only � As long as digital recording from the disc is permitted. � As long as the recording equipment is compatible with 48 kHz sampling frequency. � You cannot record MP3 signals. Can I switch to SAP during recording? � With DVD-RAM, you can, and the audio recorded also changes. Press [AUDIO] to change to SAP. � You cannot change the audio type when recording an analog MTS broadcast on a DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW disc. Establish the appropriate setting before recording with �Multi-channel TV Sound (Analog)� in the Setup menu. � Only one language channel is recorded from digital MTS broadcasts, so you will be unable to change languages during recording. Set the language in �Audio Language Setting� in the Setup menus. Page �
29 29
�
�
Can a digital audio signal from the unit be recorded to other equipment?
34
� 12 10, 12
10, 12
62
RQT8850
|
|
|
> |
|