PANASONIC DMREZ27
Instrukcja Obsługi

Clock Settings
With the unit stopped

Tips
To cancel in the middle Press [RETURN]. The unit then displays �Set Clock Manually� screen (� 55, Manual Clock Setting). � Time Zone Time Zone shows the time difference from Greenwich Mean Time (GMT). EST (Eastern Standard Time) = GMT �5 CST (Central Standard Time) = GMT �6 MST (Mountain Standard Time) = GMT �7 PST (Pacific Standard Time) = GMT �8 AST (Alaska Standard Time) = GMT �9 HST (Hawaii Standard Time) = GMT �10 For other areas: xx hr � DST (Daylight Saving Time) If you select �On�, the clock is advanced one hour starting at 2 a.m. on the second Sunday in March and ending at 2 a.m. on the first Sunday in November. Set the DST period manually when it varies according to regions (� 55).

e, r to select �Setup�, then q. e, r to select �Clock Settings�, then
Set Clock Automatically
Perform steps 1�3 of �Clock Settings�.

e, r to select �Set Clock Automatically�, then to start auto setting.
The following dialog appears when setting is complete.
Set Clock Automatically

Adjust Time Zone
Adjust the time zone (�1 or 1) if it was not set correctly with auto clock setting. You can set this menu only after �Set Clock Automatically� is completed. Perform steps 1�3 of �Clock Settings�.

e, r to select �Adjust Time Zone�, then

Clock Setting completed successfully.

4/4/2006 12:15 AM DST............... On Time Zone.... EST

e, r to select ��1� or �1�, then

Adjust Time Zone

to complete.
Notes

0

� This may take some time, up to a few hours in some cases. � If the following message appears
Setup

Tips
To return to the previous screen Press [RETURN]. To exit the screen Press [SETUP].

Set Clock Automatically
Setting completed as follows. Finish the setup with this clock time? Note: Selecting �No� will start channel scanning again and renew the clock time.

Channel Setup Disc Video Audio Display TV Screen

Yes

No

12/14/2005 5:28 AM DST.................. Time Zone....... Off EST

Automatic Off Timer
This determines how long the unit stays on when it�s not being used. Default = 6 hours (then it switches to standby) To turn off the �Off Timer�, or to change the setting to 2 hours, see page 38.

ENTER

If the time is correct, w to select �Yes�, then [ENTER]. � If you select �No�, auto setting starts again, then the above screen reappears. Repeat this step until the correct time appears. � If the clock is not correct, set the clock with �Adjust Time Zone� (� right) or �Set Clock Manually�(� 38).

57
RQT8851

Connection and Setting