Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 19 (kliknij aby zobaczyć)
User Parameters Setting Your LOGO
The LOGO helps to identify you to someone who receives your transmission. Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL MODE". Installing Your Machine When you send a document, your LOGO appears on the top of the copy printed out at the other station.
1 2 3 4
.
SET MODE (1-4) ENTER NO. OR � �
1:USER PARAMETERS? PRESS SET TO SELECT
repeatedly until display shows; Enter your LOGO (max. 25 characters and digits) by using the Keypad. (See page 17) Ex: P A N A S O N I C If you make a mistake, use or to move the cursor
LOGO �
LOGO PANASONIC�
one space beyond the incorrect character, press CLEAR then re-enter the new character. If more than 19 characters are entered, the left side characters will scroll off the display.
5
NOTE
1. Your Company Name or your name must be set because it is required by the Telephone Consumer Act of 1991. (For details, see FCC NOTICE at the end of these Operating Instructions)
