your dishwasher
3. Run hot water at sink nearest dishwasher until it is hot. Turn it off. (See page 10 for connecting instructions.)
1. Spin the Upper Spray Arm to make sure nothing will stop it from turning freely. 2. Close and latch the door.
Starting
your dishwasher
NORMAL HEAVY Cycle...
1. Make sure Cycle Control Knob points to dot marked NORMAL HEAVY. 2. Select option. 3. Without turning it, pull the Cycle Control Knob out to start the Cycle.
NORMAL
LIGHT Cycle...
RINSE & HOLD Cycle...
1. Select
Control Knob until it stops at dot marked NORMAL LIGHT. 2. Select option. 3. Without turning it, pull the Cycle Control Knob out to start the Cycle.
1. Turn Cycle
2. 3. 4. 5.
AIR DRY Option only. Uniatch door and open slightly. Pull Cycle Control Knob out. Turn Control Knob clockwise to dot marked RINSE & HOLD. Close and latch the door to start the cycle.
Control Knob
Changing
a setting
during
2. With the Cycle
pulled
out,
You can change a setting anytime any cycle. 1. Unlatch the door to stop the cycle.
turn clockwise to the cycle you want. 3. Be sure the detergent dispensers are filled properly for the new cycle. 4. Latch the door to start the cycle.
