Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 14 (kliknij aby zobaczyć)
Programmed play (PGM mode)
DP-5090/4090 (En)
14
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
Preparation
÷ Load a disc in the CD player.
COMPACT DISC PLAYER DP-5090
REMOTE CONTROL UNIT
RC-P0505
: Keys and control used in the operations described on this page.
1 Press so that the �PGM� indicator lights.
Blinks.
Do this operation in the stop mode.
P.MODE
PGM01 TNO.??
REMOTE CONTROL UNIT
RC-P0505
2 Program desired tracks.
1 Select the desired track No.
Press the numeric keys as shown below.... To enter track No. 25: 005
1 2 3
P G M 0 1 T N O . 2 5 AB
«
PGM01 ABCDEFGH
REMOTE CONTROL UNIT
4
5
6
RC-P0505
7
8
9
In the case of a CD-TEXT disc, the track�s title is scrolled on the display.
0
+10
PGM01 TNO.25
Go to step 2 within 8 seconds.
2 Set the entry.
P.MODE
÷ Tracks can also be selected by pressing the 4 or ¢ key. ÷ Up to 32 tracks can be programmed. When �FULL� is displayed, no more tracks can be programmed. ÷ If you make a mistake, press the CLEAR key and enter the track No.
REMOTE CONTROL UNIT
RC-P0505
3 Repeat steps 1 and 2 above.
from the beginning. ÷ When the total playing time of the programmed tracks exceeds 100 minutes, the remaining time on the disc will not be displayed any more.
3Start playback.
6
REMOTE CONTROL UNIT
÷ When the 4 or ¢ key is pressed during playback, the track will be skipped in the direction of the pressed button. ÷ When the 4 key is pressed once during playback, the play position returns to the beginning of the current track being played.
RC-P0505
To stop playback
7
÷ The programmed contents remain in memory.
REMOTE CONTROL UNIT
