PANASONIC DP6010-COPY
Instrukcja Obsługi

Zoom/Effects Edge/Book/Margin
I Procedure

B4·FLS

Place the Original(s)

Select ZOOM/ EFFECT Mode

Select Edge, Book or Margin

Number of Copies

Press START

Edge

# When the vertical and horizontal void areas are the same, adjust the void width by using the F·G buttons, then touch the OK button. # When the vertical and horizontal void areas are different, select vertical or horizontal edge. $ Adjust each void width by using the F·G buttons. % Touch the OK button.

Book

�

Initial setting (Factory setting): 5 mm

# Adjust void width by using the F·G buttons. $ Touch the OK button. � Initial setting (Factory setting): 20 mm

Margin

# Select the Margin area. $ Adjust void width by using the F·G buttons. The image is moved only by the void width which has been set.** % Touch the OK button. � Initial setting (Factory setting): 10 mm

NOTE

Initial setting (Factory setting) can be changed by the function mode. (See page 62) �� If a part of the copied image is missing when using the Margin mode, change the Margin Reduction setting to Yes. (See page 62) C To reset each menu mode, touch the CANCEL button on the touch panel.

�

41

Making Copies

1

2

3

45