Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 8 (kliknij aby zobaczyć)
Operating Continued
Instructions
What happensin each option
Rinse 8 Hold Cycle For rinsing a few items to be washed one or more days later. Cycle time is about 18 minutes. Do not use detergent. Water heating The dishwasher will heat water during portions of the Pots & Pans, Heavy Wash, Normal and Light Wash Cycles to improve washability (see pages 6 and 7). The Cycle Control Knob does not move while the water is heating.The DELAY/WATER HEATING Signal Light will come on while the water is heating. The heating time is based on the temperature of the water supply as it enters the dishwasher. The cooler the water, the longer the heating time. When the water temperature reaches 140°F (SO%), the Cycle Control Knob will begin moving again. If the water supply is already hot enough, the dishwasher will not pause. Lo-Energy Wash Option The dishwasher will not heat the main wash water as described above when the Lo-Energy Wash Option is selected. This will reduce the amount of electricity needed to run the dishwasher. However, dishes may not wash as well. The final rinse will still be heated. Lo-Energy Wash Option will not work with the Pots 8 Pans Cycle.
Rinse
Rinse
I
Air Dry Option Air in the dishwasher is automatically heated during the �dry� portion of all cycles except Rinse 8 Hold. If the Air Dry Option is selected, air in the dishwasher is not heated. Using this option helps save energy, but dishes take longer to dry (overnight) and some spotting may result. Some items (such as plastics) may need towel drying. For best drying results, use a liquid rinse agent such as Jet-Dry.@
