TOSHIBA D-R255SF
Instrukcja Serwisowa

Operating Instructions

Recording from external equipment you are watching

5 Press the REC button.
To pause recording
Press the
�

button to pause a recording in progress.

�

Press the button again to resume recording. You can switch channels by pressing the PROG

Before you start
Check that the disc has enough available space for the recording. Adjust the recording mode.

( / ) buttons while recording pauses. To stop recording
Press the STOP ( ) button to stop or finish a recording in progress. � When using DVD-RAM/DVD-RW/DVD-R discs, the message �Updating the information of disc. Please wait for a moment� is displayed.

1 Press the OPEN/CLOSE button, place a recordable disc on the disc tray. 2 Press the OPEN/CLOSE button to close the disc tray.
Wait until �LOAD� disappears from the front panel display. If an unused DVD-RAM disc is used, whether to format or not will be asked first. (See page 42) If an unused DVD-RW disc is used, whether to initialize or not will be asked first. (See page 42)

�

NOTE

You can not change the recording mode and input source while recording or Pause. Recording will stop automatically if there is no free space left for recording. Up to 99 titles can be recorded onto a disc. Recording will stop automatically if a copy protected image is selected. DVD-RAM/DVD-RW discs must be formatted before starting to record. Most new discs are sold unformatted. Do not use DVD-R authoring discs with this unit.

�

�

Recording

3

Press the INPUT SEL. button to select the input source according to the connection you made.
The front panel display changes in the following sequence: � PR Number � AV1 � AV2 � AV3 � DV

�

�

�

If you connect a digital camcorder, press the INPUT SEL. button to select DV. (See page 46)

4 Press thethe REC MODE button, then REC MODE button repeatedly, (or press
press the �� button) to select the recording speed(quality).
� SP � LP � EP � XP

Record Mode SP (02:12)

12-31