Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 66 (kliknij aby zobaczyć)
Copying/Erasing a pattern
Copying a pattern
1. In the pattern edit menu screen, move the cursor to the �COPY� icon and press [ENTER].
* If there is an edited pattern that has not been saved, the message �Cancel edit?� will appear. If you want to save the pattern, press [EXIT] and perform the Write operation (p. 65). If you don�t want to save it, press [ENTER].
Erasing a pattern
1. Select the pattern that you want to erase.
* It is not possible to erase the preset pattern.
2. Press [EDIT]. The edit menu screen appears. 3. Move the cursor to the �PATTERN� icon and press [ENTER]. The pattern edit menu screen appears. 4. Move the cursor to the �CLEAR� icon and press [ENTER]. The screen will ask �Clear pattern?�
fig.02-290d
The pattern copy screen appears.
fig.02-280d
Copy source Copy destination
2. Move the cursor to the copy-source pattern number, and use the VALUE dial to select a pattern. 3. Move the cursor to the copy-destination pattern number, and use the VALUE dial to select a user pattern. 4. To execute the copy, press [ENTER]. If you decide to cancel, press [EXIT]. The message �Now writing...� will appear, and the copy will be carried out. When the copy is completed, the message will disappear.
* Do not turn off the power while the message is displayed. Your data may be damaged if you do so.
5. If you are sure you want to clear (erase) the pattern, press [ENTER]. If you decide to cancel, press [EXIT]. The message �Now writing...� will appear, and the pattern will be erased. When the erasure has been completed, the message will disappear.
* Do not turn off the power while the message is displayed. Your data may be damaged if you do so.
