SONY DRN-XM01C2
Instrukcja Obsługi

Parts and Identifications
Main unit
JOG roller (MENU/ENTER)

Adjusting the Time Difference

Direct Tuning 1

This unit displays the current time by correcting the time difference between the local time and UTC (coordinated universal time) data being transmitted. Set the �hour� of your local time in the menu display. The factory-set is the eastern standard time. If the current UTC data is not received, �� � : � �� appears in the display.

You can tune in to the desired channel by directly pressing the numeric buttons (1-0) on the remote commander.

3

Press DSPL/BACK/BAND (or BAND on the remote) to select the desired band.
The band changes in the following order: t XM1 t XM2 t XM3 t XM4

Viewing the stored information 1 Press JOG roller (or MENU on the remote) to show the 2
menu display. Turn JOG roller (or press X � x on the remote) to select �MEMO� and press JOG roller (or ENTER on the remote).
MENU MEMO

Beep 1 2

You can turn the beep on or off. The factory-set is �ON�.

Line Out Level

Press JOG roller (or MENU on the remote) to show the menu display. Turn JOG roller (or press X � x on the remote) to select �BEEP� and press JOG roller (or ENTER on the remote).
The current setting appears in the display. MENU BEEP

You can adjust the output level of the signal from the LINE OUT jack in 8 levels. The factory-set is level 8 (Maximum.). Standard level adjustment � When the car connecting pack or RF modulator is connected to the LINE OUT jack of thedistortion. Level to avoid sound unit and using it in a car, turn down the Line Out � When the car connecting pack or RF modulator is not connected to the LINE OUT jack, set the Line Out Level to the maximum level.

Press the desired channel number with the numeric buttons on the remote.
The display shows the specified channel number. XM1

4 5

Cradle release button Display window Cradle release button DSPL/BACK/BAND*2 MEMO Preset buttons (1-5)* POWER*1 Remote sensor
1

1 2

Press POWER to turn on the main unit. Press JOG roller (or MENU on the remote) to show the menu display.
The first menu item appears. MENU Menu icon

Turn JOG roller (or press X � x on the remote) to select desired channel you wish to preset. Hold down the desired preset button for more than 2 seconds.
The preset number appears. Band Number

CH123

MEMO 1

Memory number

2

Press SELECT on the remote.
Even if you do not press SELECT, the channel is tuned in after a few seconds.

XM1 CH50 PRESET1 CHAN Financial News

Preset Number

3 4

If no information is stored, �NO MEMO� will appear.

ON

1 2

Turn JOG roller (or press X � x on the remote) to select the desired memory number and press JOG roller (or ENTER on the remote). Turn JOG roller (or press X � x on the remote) to scroll the stored text information.
The information appears in the following order: Artist Name/Feature t Song/Program Title t Additional Information t Channel Number t Channel Name t Time and date.

3

Turn JOG roller (or press X � x on the remote) to select �ON� or �OFF� and press JOG roller (or ENTER on the remote).

Press JOG roller (or MENU on the remote) to show the menu display. Turn JOG roller (or press X � x on the remote) to select �LINE OUT LEVEL� and press JOG roller (or ENTER on the remote).
The current setting appears in the display. MENU LINE

SCROLL MODE

The previous preset channel is deleted and the unit presets the channel being received. Note You cannot preset channels using the remote.

3

Turn JOG roller (or press X � x on the remote) to select �TIME ADJUST� and press JOG roller (or ENTER on the remote).
The �hour� flashes.
MENU TIME

Menu item

Using the Category Scrolls
In Category Scroll mode, you can search for a channel among authorized channels that have the corresponding Channel Category you selected in the menu display.

Contrast
You can adjust the contrast of the display window in 8 levels. The factoryset is level 4.

Remote commander
DSPL MEMO
POWER

ADJUST 11:12AM

1 2

Press JOG roller (or MENU on the remote) to show the menu display.
�SCROLL MODE� appears in the display.

Tuning in to a preset channel 1 Press POWER to turn on the main unit. 2 Hold down DSPL/BACK/BAND for more than 2 seconds, or
press BAND on the remote to show the display for selecting a band.

OUT LEVEL

To return to the display for selecting the memory number Press DSPL/BACK/BAND (or BACK on the remote). To exit the menu display Press MENU on the remote commander. The display returns to the tuned channel display.

1 2

12:00 AM = midnight 12:00 PM = noon

Press JOG roller (or ENTER on the remote).

Press JOG roller (or MENU on the remote) to show the menu display. Turn JOG roller (or press X � x on the remote) to select �CONTRAST� and press JOG roller (or ENTER on the remote).
The current setting appears in the display. MENU CONTRAST

3

Turn JOG roller (or press X � x on the remote) to adjust the Line Out Level while listening to the radio and press JOG roller (or ENTER on the remote).

The current scroll mode appears in the display. MENU SCROLL

3

Press DSPL/BACK/BAND (or BAND on the remote) to select the desired band.
The band changes in the following order: t XM1 t XM2 t XM3 t XM4

Reception Status
When you install the XM antenna for home use, you can check the reception status in 4 levels.

MEMO

DSPL

1

2 5 8 0

3 6 9
SELECT

BAND
PRESET

POWER BAND*2

4

Turn JOG roller (or press X � x on the remote) to adjust the hour and press JOG roller (or ENTER on the remote).
The display returns to the tuned channel display.

MODE CHANNEL SCROLL

Using other Functions
You can also use the following functions in the menu display. Menu Scroll mode Memo Back Light Beep Time Adjust Contrast Auto Power Down Line Out Level Reception Status See �Using the Category Scroll� �Storing the Information� below below �Adjusting the Time Difference� below below below below

L

H

1 2

Numeric buttons SELECT MENU BACK X/x

4 7

1 2 3 4

Note

3

PRESET

This unit does not have the Daylight Saving Time (summer time) function. To check the current time while listening to a broadcast Press DSPL/BACK/BAND (or DSPL on the remote) until the � INFO � and � TIME � display appears. See �Checking the Tuned Channel Information�. To cancel a selection Press DSPL/BACK/BAND (or BACK on the remote) to return to the previous display during menu operation. Press MENU on the remote commander to exit the menu display. The display returns to the tuned channel display.

Turn JOG roller (or press X � x on the remote) to select �CATEGORY SCROLL� and press JOG roller (or ENTER on the remote).
The selected Channel Category appears in the display. MENU CATEGORY

4

Press the desired preset button (1�5).

3

Checking the Tuned Channel Information
This unit has three display modes in the tuned channel display.

Turn JOG roller (or press X � x on the remote) to adjust contrast while checking the display and press JOG roller (or ENTER on the remote).

Press JOG roller (or MENU on the remote) to show the menu display. Turn JOG roller (or press X � x on the remote) to select �RECEPTION STATUS� and press JOG roller (or ENTER on the remote).
The current reception status appears in the display. MENU RECEPTION

MENU CH BACK
ENTER

5

SCROLL NEWS

Auto Power Down
Auto Power Down function automatically turns off the unit when the specified time passes from the last button operation. The factory-set is �60 min�.

ENTER

4

Turn JOG roller (or press X � x on the remote) to select the desired Channel Category and press JOG roller (or ENTER on the remote).
The unit searches for a channel that has the selected Channel Category from the Channel Number next to the current channel. The CATEGORY indicator appears in the upper left corner of the display.

1

Press DSPL/BACK/BAND (or DSPL on the remote).
The display mode changes as follows:

L

STATUS H

1 2

Press JOG roller (or MENU on the remote) to show the menu display. Turn JOG roller (or press X � x on the remote) to select �AUTO POWER DOWN� and press JOG roller (or ENTER on the remote).
The current setting appears in the display. MENU AUTO

CH13 CHAN TOP 20
NAME Maria TITLE Christmas INFO Concert TIME 11:00AM

XM1

Channel Number Channel Name Artist Name/Feature Song/Program Title Additional Information Current Time and Date

*1 The POWER and preset button No. 3 on the main unit have a tactile dot. *2 To show the display for selecting a band, hold down DSPL/BACK/ BAND for more than 2 seconds, or press BAND on the remote. To select a band, press DSPL/BACK/BAND (or BAND on the remote).

When a reception is poor and you receive interrupted sound, etc. The following indicators appear. In this case, adjust the XM antenna so that two or more indicators light up. See �Placement of the Home Antenna� in the �Digital Audio Receiver Accessory Kit� Installation Guide.

Playing the Receiver
Notes � Turn down the volume of the component connected to the unit before playing the unit. � Adjust the volume of the component connected to the unit. � If sound distortion occurs when playing the unit with the car connecting pack or RF modulator, adjust the Line Out Level. See �Using Other Functions�.

To cancel a selection Press DSPL/BACK/BAND (or BACK on the remote) to return to the previous display during menu operation. Press MENU on the remote commander to exit the menu display. The display returns to the tuned channel display. Tips � When you tune in to a channel in Category Scroll mode, the Channel Category appears for about 2 seconds in the display. XM1

Song

starts 12/24/02

To cancel a selection Press DSPL/BACK/BAND (or BACK on the remote) to return to the previous display. Press MENU on the remote commander to exit the menu display. Note When no operation is performed for about 1 minute in the menu display except for the Reception Status, the unit cancels a selection and the display returns to the tuned channel display.

L L

H H
No indicator or only one indicator lights up.

POWER DOWN 60min

When you obtain a good reception The following indicators appear.

Using the JOG Roller (MENU/ENTER)
Turn up or down to select channels, select the menu items and settings, or scroll the stored text information in the menu operation.

3

Tips � When the Additional Information text has more than 16 characters, text will be scrolled every 2 seconds. After all Additional Information is displayed, �--- + --- + --- + --- +� appears for about 2 seconds and then repeats displaying from the

Turn JOG roller (or press X � x on the remote) to select setting and press JOG roller (or ENTER on the remote).
The setting changes as follows:
OFF 60 min 120 min 180 min

L L

H H

Two or more indicators light up.

Manual Tuning 1 Make settings on your car audio or amplifier, etc. so that you
can listen to the sound from this unit.

CH50 News

Back Light
You can select the lighting level of the display window. The factory-set is �BRIGHT�.

Channel Category

2
Press to display the menu display, or execute the items or settings in the menu operation.

Press POWER to turn on the main unit.
The channel that you last tuned in to is displayed. XM1 CH13 TOP 20 CHAN Channel Number Channel Name

� When there is no channel that has the specified Channel Category, �CH---� is displayed. Note When the Category list cannot be received depending on the receiving condition, �--------� is displayed in step 3 above, and you cannot select the Channel Category.

beginning. � As the unit memorizes the display mode when the power is turned off, the display appears in the last display mode when you turn on the unit. Note If the channel has no text information, �--------� will appear in the display.

1 2

Press JOG roller (or MENU on the remote) to show the menu display. Turn JOG roller (or press X � x on the remote) to select �BACK LIGHT� and press JOG roller (or ENTER on the remote).

When you select a setting other than �OFF�, the Auto Power Down indicator appears in the lower left corner of the display. To disable the Auto Power Down function, select �OFF.� When the specified time passes, the following messages appear in the display.

3

Displaying the Radio ID
The receiver has its own ID, and an ID number is required when registering in XM.

� Holding down X � x makes the channel readout to rapidly increase or decrease respectively. � This unit has two scroll modes: Channel Scroll and Category Scroll. See �Using the Category Scrolls�. Channel Scroll:searches for a channel by scrolling every single channel among authorized channels. Category Scroll: searches for a channel using the Channel Category you selected in the menu display. To turn off the receiver Press POWER.

Turn JOG roller (or press X � x on the remote) to select desired channel.

Storing the Information
You can store the text information contained in the tuned-in channel. This unit can store ten sets of the following information: � Channel Number � Channel Name � Artist Name or Feature � Song or Program Title � Additional Information and Time/Date Note When you store the eleventh set of information, the oldest one will be deleted.

The current setting appears in the display. MENU BACK

POWERING DOWN
2 seconds

Presetting your Favorite Channels
Preset Tuning
You can preset up to 20 channels onto the preset buttons (1�5) in each band (XM1-XM4). To access the preset channels, simply press the corresponding preset buttons (1�5). All the preset buttons are preset to Channel Number 1 at the factory.

LIGHT BRIGHT

NO POWER DOWN? PRESS ANY KEY
When no button is pressed, the unit turns off the power. If you press any button, the timer duration will begin from the start.

3

Turn JOG roller (or press X � x on the remote) to select the desired setting and press JOG roller (or ENTER on the remote).
BRIGHT: makes the display window bright. DIM: makes the display window dim. OFF: turns off the lighting of the display window.

1 2

Press POWER to turn on the main unit. Turn JOG roller (or press X � x on the remote) to select � XM1 CH0 RADIO ID�.
The radio ID appears. XM1

Presetting a channel 1 2
Follow steps 1 to 2 in �Manual Tuning�. Hold down DSPL/BACK/BAND for more than 2 seconds, or press BAND on the remote to show the display for selecting a band.

1

CHO RADIO ID XXXXXXXX

Press MEMO when the channel you wish to store the information is received.
�MEMORIZED� appears for about 2 seconds and the information is stored in �MEMO 1�. The memory numbers of already stored information increases by one.

Radio ID

Note The Radio ID can be displayed only in Channel Scroll mode. See �Playing the Receiver�.

MEMORIZED