To check or change the programmed tracks
RC operation
CHECK
Remote control unit only
Blinks.
17
GRC operation
1 Press the CHECK key.
PGM01 TNO.25
÷ Perform only step 1 to simply check the program. ÷ In the case of a CD-TEXT disc, the track�s title is scrolled on the display. ÷ Each time the key is pressed, the program No. and the track No. on CD are displayed.
Example �
Check
Press until the track No. to be changed is displayed.
ENTER
2 Select the new track No.
123
+10 1 2 3 4 5
456 789 0 +10
ENTER
6
7
8
9
0
÷ Press it while the �PGM 01� indicator blinks. ÷ The track being played cannot be changed.
3 Set the entry.
P.MODE
P.mode
ENTER
To add a track to the program
RC operation
Remote control unit only
GRC operation
1 Select the desired track No.
+10 1 2 3 4 5
123 456 789 0 +10
ENTER
6
7
8
9
0
2 Press the P.MODE key.
÷ When a track No. is selected, the track will be added to the end of the existing program. Remote control unit only
To clear tracks from the program
RC operation
GRC operation
Press to clear tracks from the end. ÷ Each time the key is pressed, the last track in the program is cleared. ÷ The tracks which are programmed earlier than the track being played cannot be cleared.
CLEAR
Clear
ENTER
To clear all track.
P.MODE
P.mode
ENTER
÷ Selected tracks can be also completely cleared just by operating the 0 key. ÷ The entire program is cleared.
Auto space function
During programming of tracks, a non-recorded space of a few seconds will be automatically created between tracks. By recording tracks with these spaces on tape, the search and repeat play operations of tape using the DPSS function (which works by searching the non-recorded spaces) can be performed reliably. ÷ Even when the performances of two tracks are continuous (which occurs with classical or live recording music), the spaces will be created if they have different track Nos.
