JBL DS65
Instrukcja Obsługi

Specifications
JBL Decade Series
DS35 Type: Speaker Impedance: Recommended Amplifier Power Range: Frequency Response: Sensitivity (@ 2.83V, 1 meter): 3-1/2" 2-way 4 ohms 5 � 40 watts 110Hz � 20kHz 90dB 1-7/16" (37mm) 3-1/4" (83mm) DS45 4" 2-way 4 ohms 5 � 50 watts 100Hz ~ 20kHz 91dB 1-11/16" (43mm) 3-13/16" (97mm) DS55 5-1/4" 2-way 4 ohms 5 � 60 watts 75Hz ~ 20kHz 92dB 1-3/4" (45mm) 4-5/8" (118mm) DS645 4" x 6" 2-way 4 ohms 5 � 75 watts 100Hz � 20kHz 91dB 1-3/4" (45mm) 3-3/8" x 5-11/16" (86mm x 145mm)

A Note on Power Handling
JBL Decade Series speakers are designed to produce reasonable volume levels with little amplifier power. However, the addition of a subwoofer and an amplifier will enhance the dynamic range of your system and help overcome the ambient noise in a moving vehicle. These speakers are designed to handle the power of a dedicated amplifier driven at or below its rated power. If an amplifier is driven far above its rated power, the output signal will �clip, and the additional power present � in a clipped signal can damage the speakers. Distorted or �fuzzy� sound from your speakers is an indication that the amplifier has exceeded its rated power and you should reduce the volume level.

Mounting Depth, Drop-in: Cut-Out Diameter:

DS65 Type: Speaker Impedance: Recommended Amplifier Power Range: Frequency Response: Sensitivity (@ 2.83V, 1 meter): Mounting Depth, Drop-in: Cut-Out Diameter: 6-1/2" 2-way 4 ohms 5 � 75 watts 65Hz ~ 20kHz

DS755 5" x 7"/6" x 8" 2-way 4 ohms 5 � 100 watts 50Hz ~ 20kHz

DS965 6" x 9" 3-way 4 ohms 5 � 100 watts 45Hz ~ 20kHz

92dB 1-13/16" (47mm) 5-1/16" (129mm)

93dB 2-3/16" (56mm) 5" x 7-3/16" (127mm x 183mm)

93dB 2-15/16" (75mm) 6-1/16" x 8-3/4" (154mm x 223mm)

General Care
The loudspeaker grilles may be cleaned with a slightly damp cloth. Do not use any cleaners or solvents on the grilles or the speaker cones.

3