jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 316 (kliknij aby zobaczyć)
Shooting with the zebra pattern
You can set the camcorder to display a zebra pattern (diagonal stripes) in the portion of the picture on the screen with a subject whose brightness exceeds a certain level. You can check the picture level of a subject by displaying the zebra pattern. Use the zebra pattern as a guide for adjusting the exposure so that you can get the desired picture. The zebra pattern is not recorded in the tape or the �Memory Stick.� Set the ZEBRA selector to 70 or 100 while the POWER switch is set to CAMERA or MEMORY.
ZEBRA OFF 70 100
Setting 70 100 OFF
Meaning The zebra pattern appears in the portion of the picture on the screen with a subject whose brightness is about 70 IRE. The zebra pattern appears in the portion of the picture on the screen with a subject whose brightness exceeds more than 100 IRE. The zebra pattern does not appear on the screen.
To erase the zebra pattern
Set the ZEBRA selector to OFF. When the ZEBRA selector is set to 100 The portion of the picture where zebra pattern appears is an area of high brightness and overexposure.
