Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 17 (kliknij aby zobaczyć)
�7 MARKER button� on the left column
8 INPUT SELECT buttons/lamps
Select an input to display.
A: Select the video signal input to the VIDEO A terminal. B: Select the video signal input to the VIDEO B terminal. C/D: Select the signal input to the input unit (option) which is attached to the rear panel.
� For details about how to select the input signal through the input unit, refer to the input unit�s manual.
� The corresponding lamp of the input currently selected lights up.
9 Power lamp
Unlit: The main power is off. Orange: The main power is on and the monitor is in stand-by mode. Green: The monitor is on.
p Stand-by button
Turns on and off the monitor when the main power is on.
NOTES: � You cannot turn on the monitor if the main power switch on the rear panel is not turned on. � You can set the delay time between when the stand-by button is pressed and when the monitor actually turns on.
