|
|
|
Kto jest w sklepie?
Sklep przegląda 5722 gości i
1 zarejestrowany klient |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Chapter 8
08
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and video output settings, parental lock settings, and display settings, among others. If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting. 1 Press HOME MENU and select �Initial Settings�.
Initial Settings
Note � In the table below, the default setting is � shown in bold: The Digital Audio Out settings only need to be set if you have connected the digital output of this player to an AV receiver, or other equipment. Check the operating instructions supplied with your other equipment to see which digital audio formats it�s compatible with. Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often these settings can also be made from the DVD disc menu. The HDMI Out, HDMI Resolution and HDMI Color settings only need to be set if you connected this player to an HDMI-compatible component using the HDMI connector. The Digital Audio Out and Component Out settings cannot be set if the player is connected to an HDMI-compatible component using the HDMI connector. Additionally, certain settings such as HDMI Out, HDMI Resolution, and HDMI Color may be changed automatically.
�
�
2 Use the cursor buttons and ENTER to select the setting and option you want to set. All the settings and options are explained on the following pages.
�
�
Digital Audio Out settings
Setting HDMI Out (DV-410V only) Option LPCM (2CH) What it means Set if your monitor or device only accepts stereo input. On this setting multichannel audio is downmixed to 2 channels for stereo linear PCM output. Dolby Digital, DTS and MPEG sources are processed according to how they were encoded, and linear PCM sources are heard as is. No digital audio output. Choose this option when you want to change the Digital Audio Out settings. Digital audio is output from the digital outputs. No digital audio output.
Auto
Off
Digital Out
On Off
35
En
|
|
|
> |
|
