...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 77 (kliknij aby zobaczyć)
DV-646A
Disassembly of the Traverse Mechanism Assy and the Pickup Assy 1 2 3 4 5 6
Remove the Bonnet and Tray Panel. Remove the Front Panel. Remove the Loading Mechanism Assy (Screws �4). Remove the Bridge (Screw �1). Pull out the Tray and remove it while unhooking a Hook. Turn the Short SW to Short side.
7 8
Remove the DVDM Assy (Screws �2). Remove a screw.
Cautions:
Screw is locked with Silicone adhesive. Please lock it with Silicone adhesive when installs it.
9
Remove the FFC Holder with the state which Flexible Cable was atatched. FFC Holder
5
-1 Bridge Hook
8
Silicone Adhesive GEM1037
4
-1
Traverse Mechanism Assy
9
4
-2
5
-2
RearView
Bottom View
Pickup Assy
6
Short SW
When Removing The Traverse Mechanism Assy
Caution in the tray insertion
In the Tray insertion, insert it after matching a triangle mark of the Loading Base and a position of pin of the Drive Cam. Triangle mark Loading Base
10 11 12
Remove the Pickup Flexible Cable Unhook ( �4) Remove the Traverse Mechanism Assy
