Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 16 (kliknij aby zobaczyć)
9.6. Disassembling the Front Panel 1. Remove the gear from mechanism cover.
2. Insert the hexagonal screwdriver (2mm) into the gear, and then project the tip of screwdriver for 1-2mm length.
3. Upset the unit, and then insert the gear with hexagonal screwdriver into the hole of bottom base to engage the drive gear and rotate the gear in the direction of arrow (clockwise). / So, the
16
