PRIMA DVHS27P
Instrukcja Obsługi

BASIC PLAYBACK
Preparations
When you want to view a disc, turn on the TV and select the video input connected to the DVD player.

Fast forward and Fast reverse
1. Press F.FWD to fast forward through the disc. Each time the F.FWD button is pressed, the fast forward motion speed increases. 2. Press ENTER/PLAY to resume normal playback. 3. Press F.REV to fast reverse through the disc. Each time the F.REV button is pressed, the fast reverse motion speed increases. 4. Press ENTER/PLAY to resume normal playback.

Basic playback
1. Press POWER switch on the front panel to ON, the DVD player turns on and the TV screen will display the start logo. If a disc is already in the tray, it will begin to play once . 2. Press OPEN/CLOSE to open the disc tray, place a disc on the disc tray. There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction. Do not place a disc which is unplayable in this DVD player. 3. Press OPEN/CLOSE to close the disc tray, the playback will automatically start. Some discs may not playback automatically, you can press ENTER/PLAY button to start playback. 4. Some discs may start playback with a menu, use the cursor button on the remote control to select menu options and press ENTER/PLAY to start, or press digits to select a menu options directly.

Pause/Step playback
1. Press PAUSE/STEP first time to pause playback (still mode). The sound will be muted during still mode. 2. Press PAUSE/STEP and hold to single step forward to the next frame in the video. 3. Press ENTER/PLAY to resume normal playback.

NOTES:
1.

IMPORTANT NOTE: THE FOLLOWING FUNCTIONS ARE APPLICABLE ONLY TO DVD DISCS. IF OTHER DISC FORMATS ARE PLAYED, SCREEN DISPLAY AND OPERATION MAY BE DIFFERENT .

OSD
Press this button and the screen will display some information about disc, such as : " Title Elapsed " , " Title Remain ", " Chapter Elapsed ", " Chapter Remain " and " Display Off ".

SUBTITLE
Press this button and the screen will display "SUBTITLE 01/XX XXXXX", "01" indicates the original number for this language; "XX" indicates total number of languages; "XXXXXX" indicates the language of disc region (the number of language depends on disc).

V.MODE
This button can set VIDEO output among COMPOSITE , COMPONENT or P-Scan . Note: If the display on your TV turns off after pressing this button, press the button repeatedly until the display reappears. If there is picture interference or no picture, press "V.MODE" to try and correct it.

09