|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
DVD SETUP Parental Control
Parental Control prevents disc being viewed that exceed the set limit, unless a password is used. This feature allows you to prevent discs with unsuitable scenes from being played by your children.
Display Setting
You can change certain aspects of the DVD display screens, on-screen messages and the display panel on the front of the VCR/DVD. 1 Press SETUP in STOP mode. 2 Press s or B to select (CUSTOM), then press ENTER. � On screen menu will appear. 3 Press s or B to select (DISPLAY), then ENTER to confirm. 4 Press K or L to select the below items, then press ENTER.
PARENTAL PARENTAL LEVEL ALL
PARENTAL LEVEL
Parental Level allows you to set the rating level of your DVDs. Playback will stop if the disc�s ratings exceed the level you set. 1 Press SETUP in STOP mode. 2 Press s or B to select TOM), then press ENTER. 3 Press s or B to select (PARENTAL), then press ENTER. 4 Enter your four-digit password then press ENTER. 5 Press K or L to select PARENTAL LEVEL, then press ENTER. 6 Press K or L to select the desired level (ALL to LEVEL1), then press ENTER. � The rating levels continue on two menu screens. Press K or L to move to the next or previous screen to find the rating level. 7 Press SETUP to exit. NOTES: � When doing this for the first time, enter any 4 digits (except for 4737). This number will be used as the password from the second time onward. � To change the password, press K or L to select CHANGE at step 5 , then press ENTER. Enter the fourdigit password, then press ENTER. � With some DVDs, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set. � Record the password in case you forget it. (CUS-
DISPLAY TV ASPECT STILL MODE ANGLE ICON VIDEO OUT
4:3 LETTER BOX AUTO ON PAL
TV ASPECT : � Press K or L for an item selection, then press ENTER. � Select 4:3 LETTER BOX, black bars will appear at top and bottom of the screen. � Select 4:3 PAN & SCAN for a full height picture with both sides trimmed. PAN & SCAN is only available on DVDs recorded with this option, if not LETTER BOX mode will be used. � Select 16:9 WIDE if a wide-screen TV is connected to the VCR/DVD. � The default setting is 4:3 LETTER BOX. � You can also adjust the setting from (QUICK) setup menu. STILL MODE : � Press K or L for item selection (AUTO, FIELD or FRAME), then press ENTER. � This adjusts the resolution of pictures while in the STILL (PAUSE) mode. � AUTO is normally selected (default). � If you select FIELD, pictures in the STILL mode will be stabilised although they will be coarse due to little amount of data. � If you select FRAME, pictures in the STILL mode will be highly defined although they will be blurred due to output of two fields at the same time. ANGLE ICON : � Press ENTER repeatedly to turn Angle icon ON or OFF. � The default setting is ON. VIDEO OUT: � Press ENTER repeatedly to turn video out PAL or AUTO. � The default setting is PAL. When playing an NTSC disc � If you have a PAL TV, select PAL; the modified PAL signal will be output. � If you have an NTSC TV or Multi system TV, select AUTO; the NTSC signal will be output. 5 Press SETUP to exit. NOTE: � Be sure to press SETUP, or the setting will not work.
IF YOU FORGET THE PASSWORD
1 Press 4, 7, 3, 7 at step 4 in the PARENTAL LEVEL section. � Password will be cleared and parental level will be set to ALL. 2 Proceed the steps 4 - 7 again to set parental level.
PARENTAL CONTROL LEVELS
� ALL All parental lock is cancelled. � Level 8 DVD software of any grade (adult/general/children) can be played back. � Levels 7 to 2 Only DVD software intended for general use and children can be played back. � Level 1 Only DVD software intended for children can be played back, with those intended for adult and general use prohibited.
� 27 �
EN
|
|
|
> |
|
