PHILIPS DVP5100K/93
Instrukcja Obsługi

Getting Started
To deactivate Progressive manually q When the distorted picture still appears on the TV, it may be due to the connected TV does not accept progressive signals, and progressive is set by mistake. You must reset the unit to interlace format.

4 Press 3 4 to highlight one of the options
below: PAL � Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output in PAL format. NTSC � Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc (VCD only) and output in NTSC format. Multi � Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc.

E n g l i s h

1 Turn off your TV progressive scan mode
or turn on to interlaced mode (refer to your TV user manual.)

2 Press and hold EJECT on the DVD
player.

3 When the disc is ejected, press and hold
EJECT again, and numeric keypad �1� on the remote control at the same time for few seconds. � The DVD blue background screen will appear on the TV. Selecting the colour system that corresponds to your TV This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player should match.

5 Select an item and press OK.
Helpful Hints: � Before changing the current TV Standard setting, ensure that your TV supports the �selected TV Type� system. � If there is no proper picture on your TV, wait for 15 seconds for auto recovery.
CHANGING PAL TO NTSC: 1. ENSURE THAT YOUR TV SUPPORTS NTSC STANDARD. 2. IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV, WAIT 15 SECONDS FOR AUTO RECOVER.
OK CANCEL

- - Video Setup Page - TV Type TV Display Progressive Picture Setting PAL Multi NTSC

CONFIRM AGAIN TO USE NEW TV TYPE SETTING.
OK CANCEL

NTSC TV

1 Press SYSTEM MENU. 2 Press 2 repeatedly to select {VIDEO
SETUP PAGE}.

3 Press 3 4 to highlight {TV TYPE}, then
press 2.
TIPS: To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU.

16
01-39 DVP5100K_699 16 25/01/2005, 3:238239 PM

300 34321