PHILIPS DVP5900/93
Instrukcja Obsługi

DVD Setup Menu Options
LPCM Output If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust �LPCM Output�. Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality. Night Mode - turning on/off In this mode, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching your favourite action movie without disturbing others at night.

Language Digital Output LPCM Output Night Mode

Video

Audio Track PCM 96K Off

Rating

Language Digital Output LPCM Output Night Mode

Video

Audio Track PCM 96K Off

Rating

96K 48K

Off On

1 In �Audio Track�, press OK to enter the 1 In �Audio Track�, press OK to enter the
submenu.

2 Press 3 4 to highlight {Night Mode}, then
press OK.

submenu.

2 Press 3 4 to highlight {LPCM Output},
then press OK.

3 Press 3 4 to highlight one of the options
below: On Select this to level out the volume. This feature is only available for movies with Dolby Digital mode. Off Select this when you want to enjoy the surround sound with its full dynamic range.
E n g l i s h

3 Press 3 4 to highlight one of the options
below: 48K Playback a disc recorded at the sampling rate of 48kHz. 96K Playback a disc recorded at the sampling rate of 96kHz that can only be achieved in Stereo-Classic mode.

4 Select an item and press OK.

4 Select an item and press OK.
Helpful Hint: � LPCM Output can be selected only when PCM is activated.

TIPS:

To return to the previous menu, press OK. To remove the menu, press SYSTEM MENU.

31
01-37-DVP5900_AP9 31 31/08/05, 5:41 PM