DVD Menu Options (continued)
D Press to highlight one of the following options. BRIGHTNESS Increase the value to brighten the picture or vice versa. Choose zero (0) for average setting. CONTRAST Increase the value to sharpen the picture or vice versa. Choose zero (0) to balance the contrast. SHARPNESS Increase the value to enhance the sharpness in your picture or vice versa. Choose zero (0) for average setting. COLOR Increase the value to enhance the colour in your picture or vice versa. Choose zero (0) to balance the colour. E Press to adjust the setting that best suits your personal preference. F Repeat steps D~E for adjusting other color features. G Press OK to confirm. Component This setting allows you to toggle the output of the video signal between RGB (on scart) and Interlaced YPbPr. A In �Video Setup Page�, press to select { Component }, then press . { Interlaced } Select this for Interlaced YPbPr connection. { RGB } Select this for scart connection. B Use to select a setting and press OK to confirm. Warning: When the DVD player is set to YPbPr, some TV may not properly synchronise with the player on the SCART connector.
TIPS:
The underlined option is the factory default setting. Press to go back to previous menu item. Press SETUP to exit the menu item.
