SONY DVP-CX777ES
Instrukcja Obsługi

If you make a mistake entering your password
Press C before you press ENTER and input the correct number.

If you make a mistake
Press O RETURN.

Controlling Your TV or AV Amplifier (Receiver) With the Supplied Remote
By adjusting the remote signal, you can control your TV with the supplied remote. If you connect the player to an AV amplifier (receiver), you can control the volume with the supplied remote.

To turn off the display
Press DISPLAY/FILE repeatedly until the display is turned off.

Notes
� Depending on the unit being connected, you may not be able to control your TV using some of the buttons below. � If you enter a new code number, the code number previously entered will be erased. � When you replace the remote�s batteries, the code number you have set may be reset to the default setting. Set the appropriate code number again.

Controlling TVs with the remote
TV/DISC EXPLORER/ DVD switch Number buttons [/1 VOL +/� TV/VIDEO WIDE MODE ENTER

1 2 3
84

Slide the TV/DISC EXPLORER/DVD switch to TV. Hold down [/1, and enter the manufacturer�s code for your TV using the number buttons (see �Code numbers of controllable TVs� below). Release [/1.

When the TV/DISC EXPLORER/DVD switch is set to TV, the remote performs the following: