Step 2: Preparing the Remote
You can control the player using the supplied remote. Insert two Size AA (R6) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. When using the remote, point it at the remote sensor on the player.
When you have more than one Sony DVD player
If the supplied remote interferes with your other Sony DVD player, set the command mode for this player and the supplied remote to one that differs from the other Sony DVD player. The default command mode setting for this player and the supplied remote is DVD1.
Notes
� Do not leave the remote in an extremely hot or humid place. � Do not drop any foreign object into the remote casing, particularly when replacing the batteries. � Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a malfunction. � If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
Simple Start Guide
1
Slide the COMMAND MODE switch on the remote to select the command mode (DVD 1, DVD 2, or DVD 3) so that the setting for the remote differs from the other DVD players. For example, if other DVD players respond to the default command mode setting for the supplied remote (DVD 1), set the remote to DVD 2 or DVD 3. Slide the COMMAND MODE switch on the rear of the player so it matches that of the supplied remote.
