|
Dla tego produktu nie napisano jeszcze recenzji!
4. NOTE ON MOUNTEING SLED MOTOR
1) 2) Push the sled motor assy 1 toward direction A. (See Fig.5) Tighten two screws 2 (M1.7 � 2.5).
1 Sled motor ass�y
A
2 Two screws (M1.7 � 2.5)
Fig. 5
3) Raising the MD block assy 3 90 º with the side down. confirm that the optical pick-up 4 falls by self weight. (See Fig. 6) Further, with the front side of MD block assy 3 up, confirm that the optical pick-up falls by self weight.
4)
3 MD block ass�y Upper Upper
Front side
Lower
Front side Lower 4 Optical pick-up
Fig. 6
�5�
|
