Press M/m to select areas of an image. The upper region adjusts the dark areas and the lower region adjusts the light areas.
Dark areas Selected areas of an image
0% 32 64 1: ENGLISH 96 50 OFF 128 1: ENGLISH 160 2: FRENCH 192 3: SPANISH 224 100 RESET
7 8
Press ENTER. �VIDEO CONTROL� display appears. � If you selected �PB MEMORYt� The adjusted values are stored in memory when you remove the disc or press ?/1 on the remote and place the player in standby mode. � If you selected a memory number Select [SAVE] at the bottom of the �VIDEO CONTROL� display by pressing M/m and press ENTER. The adjusted values are stored in memory for the memory number you selected in step 2.
Light areas
5
Press </, to adjust the brightness level of the area that you selected. < will decrease the level (darkens the area), and , will increase the level (lightens the area). The level can be adjusted between 16 and 235. However, the level for the dark areas can never be greater than the light areas.
0% 32 64 1: ENGLISH 120 50 OFF 128 1: ENGLISH 160 2: FRENCH 192 3: SPANISH 224 100 RESET
Gamma value and the position of the bar change depending on your adjustment.
To reset only the gamma value to the default setting Select �RESET� in the gamma adjustment display by pressing M/m and press ENTER.
zYou can move the gamma adjustment display horizontally
By pressing ./>, you can move the gamma adjustment display horizontally.
Darken
Lighten
6
Repeat steps 4 and 5 to adjust the brightness level of other areas that you select. Try to keep the line that connects the brightness level of each area as smooth and straight as possible.
How to lighten the dark areas of an image.
0% 58 89 1: ENGLISH 94 50 OFF 128 1: ENGLISH 160 2: FRENCH 192 3: SPANISH 224 100 RESET
How to darken the light areas of an image.
0% 35 64 1: ENGLISH 105 50 OFF 128 1: ENGLISH 150 2: FRENCH 159 3: SPANISH 174 100 RESET
Using Various Functions with the Control Menu
To prevent the image from appearing overly altered, do not give the line any sharp changes. Gradually make the adjustments while viewing the image on your TV screen. Press ORETURN to stop making adjustments to the image.
