PIONEER DV-PT100-S/KUXTL
Instrukcja Obsługi

Connect to a Stereo Amplifier with Audio Output You can enjoy high quality audio by connecting the audio output to your amplifier. Connect the AUDIO OUT jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier.

DVD/VCR Stereo Amplifier

Audio (L) Output Audio (R) Output

To Audio (L) Input AUDIO cable (not supplied) To Audio (R) Input

Connect to an AV Amplifier with built-in digital surround (for DVD/CD playback) If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems such as Dolby Digital and DTS by using the Optical or Coaxial Digital Output. Use this connection to connect an: � AV amplifier with built-in Dolby Digital decoder � AV amplifier with built-in DTS decoder

Video cable (not supplied) DVD/VCR Video Output TV

To Video Input

Coaxial Digital Audio Output Coaxial digital cable (not supplied)

AV Amplifier with built-in various decoder as above

NOTE: You may connect to a TV with a Component video cable (not supplied) or SVideo cable (not supplied) instead of a video cable (not supplied).

Connecting the optical digital cable You may connect to an AV Amplifier with an Optical digital cable (not supplied) instead of a Coaxial digital cable. When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear panel. When not using the optical digital cable, attach the dust protection cap to protect against dust. NOTES: � The DVD OUTPUT jacks (OPTICAL, COAXIAL, AUDIO L/R, S-VIDEO and COMPONENT) are useful only for DVD section. � The VHS signal is output only from the composite jacks (DVD/VCR OUTPUT) and UHF/VHF OUT. � When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged. � Caution for the optical digital audio output connector: Do not connect to an amplifier (with an optical digital input connector) which does not contain a Dolby Digital or DTS decoder. Otherwise, any attempt to play DVDs may cause such a high level of noise that it may be harmful to your ears and damage your speakers. � DTS audio will be output only from the COAXIAL or OPTICAL output. To hear DTS audio, DTS-Decoder is necessary. � When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs. � Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.

13