1 Forced Ejection Hole
Insert a stiff rod into the hole and push to eject the tray when the tray doesn�t unload by pressing the Eject button. In the normal operation, the eject button should be used to unload the tray. Make sure the power of the drive is turned off and wait more than one minute till the disc rotation is stopped when access the eject hole.
2 BUSY Indicator
During reading During writing
Operation status is indicated as follows. Lights Lights
3 Eject Button (0) 4 Disc Tray
To unload /load the disc, press the button. Open the loading tray by pressing the eject button, then place a CD or DVD disc into the slit with the label facing up. Press the eject button or push the front part of tray to load the tray with the disc. Do not attempt to pull out the disc tray forcibly.
About DualDisc playback
A DualDisc is a new two-sided disc, one side of which contains DVD content � video, audio, etc. � while the other side contains non-DVD content such as digital audio material. The non-DVD, audio side of the disc is not compliant with the CD Audio specification and therefore may not play. It is possible that when loading or ejecting a DualDisc, the opposite side to that being played will be scratched. Scratched discs may not be playable. The DVD side of a DualDisc plays in this product. For more detailed information on the DualDisc specification, please refer to the disc manufacturer or disc retailer.
Precautions on playing 8 cm (3.15") Discs
An 8 cm (3.15") disc cannot be played even an adapter is attached to the disc when the drive is upright condition.
ABOUT REGION CODES
The region code can be changed ONLY 5 times, including the 1st setting. Please be aware the 5th change will be PERMANENT, therefore, please pay attention when changing region codes. ÷ Region codes are part of the DVD Standard. However, Region codes on DVD discs are optional. DVD discs with no specified Region code can be played on all players.
