Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 39 (kliknij aby zobaczyć)
DV-S555
Disassembly of the Traverse Mechanism Assy
1 2 3 4 5 6
Remove the top cover and Tray Panel. Remove the Tray panel and Front Panel. Remove the Bridge (Screw 1). Pull out the Tray and remove it while unhooking a Hook. Turn the Short SW to Short side. Remove three connectors.
7 8
Remove the Loading Mechanism Assy (Screws 4). Remove a screw.
Cautions:
Screw is locked with Silicone Adhesive. Please lock it with Silicone Adhesive when installs it. Remove the FFC Holder with the state which Flexible Cable was attached. 8 Silicone Adhesive GEM1037 Traverse Mechanism Assy
9
4
-1
Hook Bridge
9 3 -1 6 6
3
-2
6
FFC Holder
4
-2
DVD main PC board assy
RearView
Bottom View
Short
DVD main PCB side
Open
5
Short SW
When Removing The Traverse Mechanism Assy
Caution in the tray insertion
In the Tray insertion, insert it after matching a triangle mark of the Loading Base and a position of pin of the Drive Cam. Triangle mark Loading Base
10 11 12
Remove the Pickup Flexible Cable Unhook ( 4) Remove the Traverse Mechanism Assy