SHARP DVSL10EM
Instrukcja Obsługi

E57B7QD.QX3

03.5.29 4:12 PM

Page 14

PLAYING A DISC Fast Forward / Reverse Search Zoom

DVD

CD

MP3

DVD-RW
VR mode

VCD

DVD

DVD-RW
VR mode

VCD

1 During playback, press FWDg or REVh repeated-

ly to select the required forward or reverse speed: x2, x8, x50, x100.
� If you are using FWD g or REVh on the front panel, press and hold it for more than 1.5 sec (the longer you hold it, the faster the speed will be). When you reach

The Zoom function allows you to enlarge the video image and to pan through the enlarged image. 1 Press ZOOM during playback. � Playback will continue. 2 Press ZOOM repeatedly to select the required

the desired speed, release the button.
� For video CDs, the speed is fixed at x2, x8 or x30. � For audio CDs, the speed is fixed at x16. � For MP3, the speed is fixed at x8. 2 To return to normal playback, press PLAY.

zoom factor: x2, x4 or OFF. 3 Use Arrow ( L / K / B / s ) to move the zoomed picture across the screen.
4 To exit zoom mode, press ZOOM to OFF.

NOTES:

Slow Forward / Slow Reverse

DVD

DVD-RW
VR mode

VCD

� Zooming function does not work while disc menu is shown. � x4 zoom is not available on some discs. � Only x2 zooming is available for VCD.

1 During playback, press STILL/PAUSE. 2 Press FWDg or REVh . � Slow motion playback will begin and sound will be muted. 3 Press FWDg or REVh repeatedly to select

Track

CD

VCD
without PBC function

the required speed: 1/16, 1/8, 1/2 of the normal playback.

There are three ways to begin playback on an Audio CD at a specific Track.

� If you are using FWD g or REVh on the front panel, press and hold it for more than 1.5 sec (the longer you hold it, the slower the speed will be). When you

Using the Numerical key pad 1 Press the numerical key pad to enter the desired Track number.
� Playback will start at the selected track. � For single digit tracks (1-9), press a single number (eg. track 3, press 3). � To play track 26, press +10, 2, 6 on the numerical key pad.

reach the desired speed, release the button. 4 To return to normal playback, press PLAY.
� You cannot play the VCD in reverse slow motion.

Using the DIRECT SKIP.
1 Press DIRECT SKIP. � The track search display appears. 2 Within 30 seconds, select a desired track number using the numerical key pad. For single digits press �0� first. � Playback will start at the selected track.

Using the SKIP H G
During playback, press SKIP G to move to the next track. Press it repeatedly to skip subsequent tracks. Press SKIP H to go back to the beginning of the current track. Press it repeatedly to go to the previous tracks. � Track number will appear briefly on the DVD display panel. � If SKIP is pressed while the playback is paused, the playback will be paused again after skipping to the next track.

NOTE:
� SKIP H G are not available when playback is stopped.

� 14 �

EN