SHARP DVSL10SA
Instrukcja Obsługi

E57B9QD.QX3

03.5.29 4:27 PM

Page 20

DVD SETUP Display Setting
You can change certain aspects of the DVD display screens, on-screen messages and the display panel on the front of the DVD player. 1 Press SETUP in STOP mode. 2 Press B to select

Language Setting
Language options are not available with some discs. 1 Press SETUP in STOP mode. 2 Press B to select

(CUSTOM), then press

(CUSTOM), then press

ENTER.
� On screen menu will appear.

� On screen menu will appear. 3 Press s or B to select (LANGUAGE), then

ENTER.

ENTER to confirm.
4 Press K or L to select the below

(DISPLAY), then ENTER to confirm. 4 Press K or L to select the below items, then press ENTER. TV ASPECT :

3 Press B to select

items, then press ENTER.
DISPLAY TV ASPECT PANEL DISPLAY ANGLE ICON AUTO POWER OFF VIDEO OUT 4:3 LETTER BOX BRIGHT ON ON PAL

AUDIO :
� Sets the audio language.

SUBTITLE :
� Sets the subtitle language.

LANGUAGE AUDIO SUBTITLE DISC MENU PLAYER MENU

ORIGINAL OFF ENGLISH ENGLISH

DISC MENU :
� Sets the language for DVD Menu.

� Press K or L for an item selection, then press ENTER. � Select 4:3 LETTER BOX for a black bars appears on top and bottom of the screen. � Select 4:3 PAN & SCAN for a full height picture with both sides trimmed. PAN & SCAN is only available on DVDs recorded with this option, if not LETTER BOX mode will be used. � Select 16:9 WIDE if a wide-screen TV is connected to the DVD player. � The default setting is 4:3 LETTER BOX. � You can also adjust the setting from (QUICK) setup menu.

PLAYER MENU :
� Sets the language for the On-Screen display. � You can also adjust the setting from (QUICK) setup menu. 5 Press K or L to select a setting, then press

ENTER.
� If OTHER is selected in the AUDIO, SUBTITLE or DISC MENU screen, press four-digit number to enter the code for the desired language. (Refer to the language code list on the next page). � Only the languages supported by the disc can be selected. 6 Press SETUP to exit.

PANEL DISPLAY :
� Press K or L for an item select BRIGHT, DIMMER and AUTO, then press ENTER. � This adjust the brightness of the display panel with the factory default BRIGHT. � When AUTO is selected, the display dims only during playback.

NOTE:
� Language Setting for Audio and Subtitle is not available with some discs. Then use AUDIO and SUBTITLE. Details are on page 17.

NOTE:
� You can change the PANEL DISPLAY setting (BRIGHT or DIMMER) by pressing DIMMER on the remote control.

ANGLE ICON :
� Press ENTER repeatedly to turn Angle icon ON or OFF. � The default setting is ON.

AUTO POWER OFF :
� Press ENTER repeatedly to turn Auto Power off ON or OFF. � The default setting is ON and it will turn the DVD player to off automatically after 35 minutes of no use.

VIDEO OUT :
� Press ENTER repeatedly to turn video out PAL or AUTO. � The default setting is PAL.

When playing an NTSC disc
� If you have a PAL TV, select PAL; the modified PAL signal will be output. � If you have a NTSC TV or Multi system TV, select AUTO; the NTSC signal will be output. 5 Press SETUP to exit.

NOTE:
� Be sure to press the SETUP button, or the setting will not work.

� 20 �

EN