SONY DVW709WSP
Instrukcja Obsługi

(4) Turn the rotary encoder and check that the setting value or ON/ OFF indication of the item selected by the cursor changes.

4

After once setting the MENU ON/OFF/PAGE switch to OFF, set the OUTPUT/DCC selector to CAM, and change the ND FILTER selector position in the sequence of 1, 2, 3, 4. Check that the FILTER indicator on the viewfinder screen displays the correct numbers. Check each of the following operations, and make sure that the indicator lights if the corresponding item has been turned on in the �!� LED page. (1) Set the gain to anything but 0 dB by the GAIN selector and on the MASTER GAIN page of the setup menu. (2) Set the SHUTTER selector to ON. (3) Set the WHITE BAL switch to PRST. (4) Use the lens extender. (5) Set the ND FILTER selector to anything but 1. (6) Set the iris to automatic mode, and turn the rotary encoder to change the reference value to other than the standard value. Push the SHUTTER selector from ON to SEL repeatedly, and check that the shutter setting changes on the viewfinder screen. Pointing the camera at a suitable subject, focus the camera and check the picture on the viewfinder screen. (1) Set both of the AUDIO IN switches to FRONT and the DISPLAY switch on the viewfinder to ON. Check that when sound is input to a microphone connected to the MIC IN connector on the front of the camcorder, the audio level indication appears on the viewfinder screen.

5

6

6 7 8

6-4

Chapter 6 Maintenance