Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 9 (kliknij aby zobaczyć)
Options:
AccuTemp Press the AccuTemp pad to insure the water is heated to the proper temperature for best cleaning and drying results. A small indicator light will glow when it is selected. If the water temperature is low, the main wash will be extended and the Heating Delay indicator light will glow. Press the AccuTemp pad again to cancel this option. This option is not available in the Quick or Rinse & Hold cycles,
Cancel Heat Dry by pressing the pad again. No heat will be provided, but the fan will still operate. Cancelling the Heat Dry option on the Quick cycle will eliminate the dry portion entirely in order to shorten the cycle. The load will need to be towel dried. Recalling/Changing Options
Each option can be changed anytime the dishwasher is on and the door latched. (Note: When the Quick cycle with Heat Dry is selected, options can be changed during the first minute only.) NOTE: Your dishwasher features an option recall which memorizes the option selected with a cycle. For example, if Heat Dry is selected with a particular cycle, it will be recalled automatically the next time that cycle is selected. TO Start Dishwasher: NOTE: Run the water from the hot water tap to clear the line of cold water before starting. After loading close the door; press the door until it latches. Turn the dishwasher on by firmly pressing the pad corresponding with the chosen cycle. Pressing Heavy, Normal, Light, Quick PAGE9
Sani
Pressthe Sani pad to turn the heating element on during all washes and rinses. A small indicator light will glow when it is selected. The Sani option helps maintain water temperature and improve drying results. This option is not available for the Rinse & Hold cycle. Pressthe Sani pad again to cancel this option, Heat Dry Select this option to provide heat during the fan dry cycle. This option provides faster drying. A small indicator light will glow when it is selected,
