Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
Mounting the hood body
� Before attaching the hood body, tighten the two screws Vr located on the hood body mounting points. � Hook the hood body onto the screws 12a � Fully tighten support screws 12a � Adjust screws Vr to level the hood body
Vr
12a
Connections
DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø 150 or 120 mm, the choice of which is left to the installer. � To install a ø 120 mm air exhaust connection, insert the reducer flange 9 on the hood body outlet. � Fix the pipe in position using sufficient pipe clamps (not supplied). � Remove any activated charcoal filters.
