Installation
Installing the appliance
^ Set the plate warmer into the niche, push is all the way in and align it at a right angle.
Aligning the appliance front
After installing the combination appliance it may be necessary to align the appliance front and/or even the gap between the plate warmer and the combination machine. Flat washers are supplied beneath the knurled nuts, which fix the drawer to the telescopic runners.
^ Open the drawer and fix the appliance with the two supplied screws at the side panels of the cabinet. ^ Install the combination appliance regarding the manual supplied with that machine.
^ Loosen the knurled nuts and take the drawer out. ^ Align and even the gap with the flat washers by changing their position (above or below the drawer), on both sides.
