WHIRLPOOL EHD344
Instrukcja Obsługi

7. Removal of SUB1 Board
1. Disconnect CN101 on SUB1 Board. 2. Unscrew 2 screws (G) so that the SUB 1 Board can be removed.

9. Removal of MAIN Board
1. Disconnect CN1 on MAIN Board so that the EVF cable can be removed. 2. Unscrew 4 screws (H) so that the MAIN Board can be removed. SCREWS (H)

CN101

SCREWS (G) SCREWS (H)

8. Removal of SUB2 Board
1. Unscrew hex screw fixing all front knobs. (PEAKING, CONTRAST and BRIGHT knob) 2. Unscrew hex nut (A) and then pull out the each front knob so that the SUB 2 board can be removed.

10. Removal of Guard Bar
1. Unscrew 2 screws (I) so that the Guard bar can be removed.

SCREWS (I)

Hex nut (A)

DIS-3