Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 14 (kliknij aby zobaczyć)
17 Adjusting the headphone volume Briefly press the SET button once. The display now indicates �PHonE� in alternation with a three-digit number indicating the current volume level at the headphone output of your EK 3041U receiver. The adjustment range of the headphone volume is between 0 an 126 (on the display). The headphone output can only be used if the receiver is not inserted in the slot-in facility of a camcorder but is operated as a stand-alone receiver, e.g. inserted into a special housing (accessory). If the receiver is inserted in the slot-in facility of a camcorder, the headphone volume cannot be adjusted and the menu is skipped.
With the / buttons you can now select a different volume setting. Selecting a smaller value reduces the volume, selecting a higher value increases the volume. The new setting becomes effective immediately without having to be stored. Notes You can discontinue the programming of this menu at any time. Press the SET button to change to the next menu or briefly press the ON/OFF switch to discontinue your entry. The cancellation is briefly confirmed on the display with �ESC�. The display then switches back to the standard display (display of receiving frequency or channel number)(u see chapter 16). After about 15 seconds, the receiver automatically returns to normal operation if no entry has been made during this period. Here, too, �ESC� flashes briefly.
