Maintenance and Cleaning
Before any maintenance or cleaning work is carried out DISCONNECT the appliance from the ELECTRICITY supply.
Your appliance is frost free, which means there is no need to manually defrost your appliance, as this will be carried out automatically.
Defrosting
Changing the light bulb
1. Switch off the appliance by pressing the ON/OFF button, and then unplug the appliance. 3. Open the plastic light cover, by pushing upwards on the centre clip. The cover will then swing down. 4. Unscrew the light bulb and replace with a bulb with the following specifications:
External Cleaning
Wash the outer cabinet with warm soapy water.
Do not use abrasive products. There may be sharp edges on the underside of the product so care should be taken when cleaning.
Ensure the vents at the back of the appliance are clear of dust and debris etc.
Internal Cleaning
Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly.
2 standard bulbs 25W-E14
When the appliance is not in use
When the appliance is not in use for long periods, disconnect from the electricity supply, empty all of the food and clean the inside of the appliance. Switch off the appliance and leave the door ajar to prevent unpleasant smells.
Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or cleaning products containing bleach or alcohol.
Regularly check the door seals and wipe clean to ensure they are clean and free from debris.
Storage shelves
This appliance is equipped with plastic storage shelves. The storage shelves can be adjusted to various heights: 1. Pull the storage shelf forward and remove. 2. Insert a different height.
Cleaning the Condenser
The Condenser at the bottom of your appliance needs to be cleaned periodically. Remove the plinth, and clean with a vacuum cleaner. Ensure the plinth is replaced after cleaning.
