|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
;
...instruction is ok.
...instrukcja jest ok.
Thanks/Dzięki
;
Documentation made available quickly and It is good quality. Thanks.
CHAPTER 3. ROM REPLACEMENT
Before trying to replace the ROM in the machine now available on the market, be sure to back up the data.
[STANDARD ECR] [IN-LINE SYSTEM ECR]
START
START
1. Output a check report with the ECR in In-line setting. (PGM#3610)
1. Using an ER-01FD/02FD, save the current data on the RAM to floppy disk. (SRV#996)
2. Using an ER01-FD/02FD, save the data on the RAM to a floppy disk. (SRV#996)
2. Replace the old ROM with a new ROM for EURO.
3. Replace the old ROM with a new ROM for EURO.
4. Perform Master reset.
3. Perform Master reset. 5. Using an ER01FD/02FD, load the data to ECR.
(SRV#998)
4. Using an EF01FD/02FD, load the data to ECR. (SRV#998) 7. Perform Program (service) reset.
5. Perform Program (service) reset.
8. Program the ECR for EURO applications.
*6. Delete the existing SSP data.
992 TL
9. Refer to the PGM#3610: In-line setting check report. Start the In-line mode using In-line set up job. (SRV#895)
7. Perform Program (service) reset.
10. Program the ECR for EURO applications
8. Program the ECR for EURO applications.
11. Perform Download in the In-line mode. (PGM#4300) (PGM#4600)
END
END
* The SSP data for an old version ROM is included in the new version ROM.
�8�
|
