Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 6 (kliknij aby zobaczyć)
Moving the meat drawer and cover...
The meat drawer and cover can be removed for cleaning and moved to another shelf, if desired. Remove the meat drawer first.
To remove
the meat
drawer
and cover:
1. Slide meat drawer out to the stop. 2. Lift the front of meat drawer. 3. Slide drawer the rest of the way out. 4. To remove the cover, lift it straight up and out. To replace the meat drawer and cover:
1. Fit notches of cover sides over center shelf support. 2. Lower cover into place. 3. Fit edges of drawer into supports on cover. 4. Slide meat drawer into place.
Changing the light bulb...
�\;=x
1. Reach behind the control console 2. Remove bulb. 3. Replace with a 40-watt appliance
to find bulb. bulb
Adjusting
To remove
the refrigerator
shelves...
the shelves:
GUIDE STOP 1. First, remove food from shelf. 2. Slide shelf straight out to the stop. SHELF STOP 3. Lift front, slide shelf the rest of the way out. To replace the shelves: SHELFGUIDE
1. Fit back of shelf on top of guides with wire stops on the bottom of guides. 2. Lift front, slide shelf in until it clears guide stops
Removing crispers and crisper cover . . .
LIFT THE FRONT,THEN THE BACK. L \ To remove the crispers: 1. Slide crisper straight out to the stop, then slide the rest of the way out. 2. Replace To remove in reverse the cover: order.
1. Lift front and remove the cover support 2. Lift out cover by pulling up and out. To replace the cover:
PULL OUT TO THE STOP. LlFl THE FRONT AND PULL AGAIN.
1. Fit back of cover into notch supports on Walls of refrigerator, then lower front into place. Replace cover support with the long tab toward the front. NOTE: If support needs adjustment, turn base right to raise, or left to lower.
