WHIRLPOOL ET18AKXTF00
Instrukcja Obsługi

Adjusting

the refrigerator

shelves...
To remove shelves: 1. Tilt up at front. 2. Lift up at back. 3. Pull shelf straight out.

Shelves can be adjusted your refrigerator.

to match the way you use

To replace shelves: I. Guide the rear hooks into the slots in the shelf supports. 2. Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level position.

Removing and adjusting the freezer shelf...
To remove the shelf: 1. Lift front slightly. 2. Lift back off supports. 3. Replace in reverse order. To adjust the shelf: 1. Remove shelf. 2. Remove supports by sliding upwards, 3. Replace supports on desired level. 4. Replace shelf.

Removing the crispers and crisper cover...
PULL OUT TO THE STOP, LIFT THE FRONT AND PULL AGAIN.

To remove the crispers: 1. Slide crisper straight out to the stop, lift front, then slide the rest of the way out. 2. Replace in reverse order. To remove the cover: 1. Push up glass insert from bottom, then slide out with both hands. 2. Lift front of cover frame. 3. Lift out cover frame by pulling up and out. 4. Remove metal cover support

REMOVE THE GLASS INSERT, LlFl THE FRAME FR THEN THE BACK.

To replace the cover: 1. Replace metal cover support in front section of cabinet.

on wall supports

2. Fit back of corner into notch supports on walls of refrigerator, then lower into place. 3. Slide back of glass insert into place, then lower front.

Moving the meat drawer and cover . . .
PULL OUT TO THE STOP, LIFI THE FRONT AND PULL AGAIN.

To remove 1. 2. 3. 4.

the meat

drawer:

Slide the meat drawer out to the stop. Lift the front. Slide the drawer the rest of the way out. Replace in reverse order.

6

To remove the cover: ss IS HEAVY. 1. Tilt front of cover up, lift at back, and pull straight out. 2. Replace in reverse order.