WHIRLPOOL ET18NKXRWR3
Instrukcja Obsługi

Adjusting

the refrigerator

shelves...

I, Ftrst, remove food from shelf 2 Slide shelf strarght out to stop 3 Lift front 4. Slrde the rest of the way out Replacing Shelf: 1 Frt back of shelf on top of gurdes wrth wire stops on the bottom of gurdes. 2 Lrft front, slide shelf In until rt clears g&e stops The meat pan and cover can be removed for cleanrng and moved to another shelf, If desred Remove the meat pan first

Moving

the meat pan and cover...

Removing: I Slide the pan out to stop. 2. Lift the front of meat pan. 3. Slide pan the rest of the way out 4. Tilt cover up at front. 5. Pull forward and out Replacing: 1 Fit notches underneath cover over rear and center cross bars on shelf 2. Lower cover In place. 3. Replace meat pan rn reverse order

Removing

crispers

and crisper

cover.. .
Lift the Front, Then the Back.

Removing the Crispers: 1 Slide crrsper strargnf out to stop, lift front, then side the rest of the way out 2 Replace rn the reverse order Removing Cover: 1 Loftfront and remove the cover support 2 Loftout cover by pullrng up and out Replacing Cover: 1 Fit bock of cover Into notch supports on walk of refrrgerator, then lower front Into place 2 Replace cover support with the long tab towards the front Note: If support needs adjustment. turn base right to lower, or left to rorse

Pull out to stop. e Front and Pull Again.

Changing
WARNING:

the light bulb...
Before removing the light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigerator at the main power supply. Shock and injury can occur if electricity remains connected.

1 Reach behInd control console to find bcllb 2 Remove bulb 3 Replace with a 0watt opp:jance bcllb

Removing

and adjusting

the freezer shelf...

To remove shelf: 1 Lift front slrghtly 2. Loftback off supports 3 Replace In reverse order 70 adjust shelf: 1 Remove sheif 2 Remove supports by sltdrng upwards 3 Replace supports on desired level 4 Replace shelf
b