WHIRLPOOL ET20MKXLWR0
Instrukcja Obsługi

Adjusting

shelves.. .

Removing freezer shelf.. .
l l l

Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavv food items. To remove glass shelves: 1. Tilt up at front. 2. Lift up at back. 3. Pull shelf straight out. Glass shelves ore

Lift front sliahtlv. Lift back 0% supports. Replace in reverse order.
Lift the Front Then the Back

a�

*,x.,_ITIIwCa-

-m

eL+*,

.T.

Adjusting crisper Humidity Control...
You can control the amount of humrdity In the moisture-sealed crisber The control can be adjusted to any setting between LO and HI LO (open) lets moist air out of crisper for best storage of fruits and vegetables with skrns. HI [closed] keeps moist air in the crisper for best storage of fresh leafy vegetables
s--G*.--,,* 1-%�> .%-WI u---w--e

1. Guide the rear hooks into the slots tn the shelf supports. 2. Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level position To remove door shelves: Lift up and out l To replace: l Insert hooks into guides on both sides. l Push down.
i .., --m-s ^ ..Iam. z.T.ru+..,* c QnPS%azze .la.--

Moving the meat pan.. .
The meat pan can be taken out and moved the same way as the shelves, Remove the meat pan first. Removlng: I, Slide the meat pan out to stop. 2. Lift the front of meat pan. 3. Slide pan the rest of the way out. 4. Tilt cover up at front. 5. Lift up at back. 6. Pull straight out. Replaclng: I, Guide the rear hooks into the slots in the shelf supports. 2. Tilt up front of cover until rear hocks drop into slots. Lower front of cover to level position. 3. Replace meat pan in reverse order. ,.,Pr.-/n.As�ese&zx -, or for Use

Removing the crispers and crisper covers.. .
l l l l

Slide crispers straight out to stop. Lift the front. Slide the rest of the way out. Replace in reverse order.

Covers are held in place by two pegs at the back and two notched tabs in front.
Push the lab to Clear the Cover.

Changing the light bulb.. .
Before removing the lrght shield for cleaning replaclng the bulb, unplug the refrigerator.
appliance bulbs only

Snap Back Into Place.

.

�7�

�

Press front tabs out of the way. 0 Lift cover front. Lift back off the pegs, l
l

l

l l

Replace

in reverse order.

The center leg can be made shorter or longer to help level the crisper covers, if necessary. Turn the leg clockwise to make it longer. Turn it counterclockwise to shorten it
6

l l l

Push lightly on the top center of the light shield until the notched tab unhooks from the control panel Pull down on the shield untrl the tab clears the control panel. Lift the back hooks out of therr slots. Replace wrth a 40-watt appliance bulb. Replace light shield in reverse order.