Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 19 (kliknij aby zobaczyć)
Operating sequence
Washing only
Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
4. Switch the machine on
: the mains-on light comes on.
To switch the machine on, press the ON/OFF button
---
1. Place the laundry in the drum
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door. If the programme selector dial is on the RESET O position, three flashing dashes will be displayed. If the programme selector dial is positioned on a wash programme, the duration of that programme will be displayed.
5. Select the desired programme
Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on.
° 0 ° C 3 4
P0004
95° E° 0 6
GF
D
4 0 °E
30°
B A
If you wish to carry out the prewash, pour detergent into the appropriate compartment marked .
The display shows the duration of the programme.
6. Select the spin speed or option 3. Measure out the additives
If required, pour fabric softener into the compartment marked , without exceeding the «MAX» mark. Depress the spin speed button to choose the required speed or option : the corresponding light comes on.
1200 900 700 500
P0876
P0877
45
ENGLISH
40° ° 30
30 ° 44 0° 0°
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment .
