Operating instructions
1. Place the laundry in the drum
lift up the lid of the machine open the drum with your two hands by pressing the button A and the two flapdoors till they disengage introduce the laundry into the drum ; close the drum and the lid of the machine
5. Select the temperature
Choose the temperature which corresponds to the chosen programme, with the help or the indications of the programme table, according to the fibers and the fastness of the colours.
6. Select the programme
Choose the programme according to the nature and the degree of soil of the laundry. Turn the programme selector clockwise to select the chosen programme. Never turn the timer knob when the washing machine is working.
A
Be careful : before closing the lid of your machine, make sure that the drum flapdoors are correctly closed : - the two flapdoors fastened - the button A pressed out.
7. Starting of programme
The ON/OFF pushbutton " " enables to switch on your machine. The control lamp lights on and the programme begins.
2. Measure out the detergent
Measure out the amount of detergent recommended by the manufacturer in the main wash compartment (bII). If you wish to carry out a prewash, pour the amount required into the prewash compartment (aI).
8. At the end of the programme.
When the selected programme is over, the machine stops automatically. The timer knob stops on the position "I" for the cotton programmes and on the rinse hold position for the synthetics programmes. You can end these programmes by a spinning (programme G) or by a draining (programme R). Please release the " " on/off pushbutton before your choice. Be careful : a safety device enables to open the lid of your waschine machine only about 2 minutes after the machine has stopped. After each wash: depress the on/off pushbutton ; the control lamp lights off. press out the pushbutton (" ") if necessary unplug the machine from the wall socket turn off the water tap.
Do not exceed the MAX level. If you wish to use liquid detergent : choose a programme without prewash put the measuring ball directly into the drum.
3. Add the fabric softener
Pour the softener, if required, into the compartment marked c . Do not exceed the MAX level.
